GIT – I have Red Hat Enterprise 6.x server. How do I find out and groups network bandwidth usage by process under operating systems? How do I find out what programs are using network bandwidth under operating systems?

Website : http://nethogs.sourceforge.net/

You need to use nethogs . It is a small “net top” tool. From the nethogs project home page:

Instead of breaking the traffic down per protocol or per subnet, like most such tools do, it groups bandwidth by process and does not rely on a special module to be loaded. So if there’s suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this, and if it’s some kind of spinning process, kill it.

Please note that this tool only works under Linux operating systems.

nethogs under or Linux

Type the following apt-get command to install nethogs package:
$ sudo apt-get install nethogs
Sample outputs:

Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libavutil-extra-51 libggiwmh0-target-x libggi2 libgii1
  libvo-aacenc0 libgii1-target-x mplayer-skin-blue libggiwmh0
  libggi-target-x libvo-amrwbenc0
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
  nethogs
0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded.
Need to get 0 B/28.2 kB of archives.
After this operation, 115 kB of additional  space will be used.
Selecting previously deselected package nethogs.
(Reading database ... 331881 files and directories currently installed.)
Unpacking nethogs (from .../nethogs_0.7.0-3_amd64.deb) ...
Processing triggers for man-db ...
Setting up nethogs (0.7.0-3) ...

Install nethogs under RHEL or or Fedora Linux

First turn on EPEL repo and type the following  command to install nethogs package:
# yum install nethogs
Sample outputs:

Loaded plugins: product-id, rhnplugin, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
This system is receiving updates from RHN Classic or RHN Satellite.
rhel-x86_64-server-6                          | 1.5 kB     00:00
rhel-x86_64-server-6/primary                  |  13 MB     00:01
rhel-x86_64-server-6                                     10127/10127
rhel-x86_64-server-6-debuginfo                | 1.3 kB     00:00
rhel-x86_64-server-6-debuginfo/primary        | 776 kB     00:00
rhel-x86_64-server-6-debuginfo                             4240/4240
rhel-x86_64-server-optional-6                 | 1.5 kB     00:00
rhel-x86_64-server-optional-6-debuginfo       | 1.3 kB     00:00
rhel-x86_64-server-supplementary-6            | 1.5 kB     00:00
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package nethogs.x86_64 0:0.8.0-1.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=====================================================================
 Package        Arch          Version              Repository   Size
=====================================================================
Installing:
 nethogs        x86_64        0.8.0-1.el6          epel         28 k

Transaction Summary
=====================================================================
Install       1 Package(s)

Total  size: 28 k
Installed size: 53 k
Is this ok [y/N]: y
Downloading Packages:
nethogs-0.8.0-1.el6.x86_64.rpm                |  28 kB     00:00
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : nethogs-0.8.0-1.el6.x86_64                        1/1
  Verifying  : nethogs-0.8.0-1.el6.x86_64                        1/1

Installed:
  nethogs.x86_64 0:0.8.0-1.el6

Complete!

How do I use nethogs?

The syntax is:

 
nethogs
nethogs eth1
nethogs [option] eth0 eth1
nethogs [option] eth0 eth1 ppp0
sudo /usr/sbin/nethogs eth0

Sample outputs:

Fig.01: nethogs in action

Fig.01: nethogs in action
Another output from one of my personal RHEL server:

Fig.02: Nethogs in action on my centos/rhel box

 

Keyboard shortcuts

Use the following interactive controls:

  1. m : Cycle between display modes (kb/s, kb, b, mb)
  2. r : Sort by received.
  3. s : Sort by sent.
  4. q : Quit and return to the shell prompt.

Other options

       -d     delay for refresh rate.
       -h     display available commands usage.
       -p     sniff in promiscious mode (not recommended).
       -t     tracemode.
       -V     prints Version info.

Check out related media

This tutorial is also available in a quick video format:

http://www.youtube.com/watch?v=haROZ8adBkE

Print Friendly

Comments

comments

Bài viết liên quan